|
COMAPACT & LIGHT WEIGHT
B Series DG sets are smaller and lighter than any other
DG set in its class, hence giving you the advantage of
Optimizing your valuable
space.
ENVIRONMENT FRIENDLY POWER
B
Series DG sets are available with the lowest noise
Levels in its range and are CPCB certified for emissions
Compliance, hence bringing you environment friendly
Power.
LOWEST OPERATING COST
All elements of DG sets are designed to work together to
Maximize efficiency and offering you the advantage or
Lowest Operating costs.
SINGLE SOURCE POWER ASSURANCE
All major components-the engine, alternator, control
system and canopy are disgned, manufactured and tested
by CUMMINS India.
STANDARD SCOPE
ENGINE------------
B Series DG sets , powered by Cummins B Series
Engines, are rated at 1500 RPM and conform to ISO 8528
Specifications.The engines are radiator cooled , four stroke
And multi cylinder,
conforming to BS 5514/ISO 3046
STANDARD SCOPE
ALTERNATOR-----------
Synchronous Alternator of Stamford make suitable for
Continous operation at 1500 RPM,415 volts, 0.8pf (lag)
Suitable for 50 HZ, 3 phase,
4 wire system, conforming to BS 5000 / IS 4722. The alternator is brushless type
Screen protected, revolving field, self excited, self
regulated
Through an AVR. The alternator has the following features:
# +- 1.5% voltage regulation (max) in static conditions
# Instrument fuses duly fired and ferruled.
#Permissible Overload of 10% for one hour in 12hrs. of
operation.
MOUNTING
ARRANGEMENT
Engine and Alternators are mounted on a common MS
Fabricated base frame with
AVM pads.
CONTROL PANEL
The control panel with 1416 gauge CRCA sheet and powder
Coated for a weather proof,
longlast finish.
The panel is provided with:
# MCCB of suitable rating with overload and short circuit
protection.
# Voltmeter with selection switch.
# Ammeter with selection switch.
# Frequency meter.
# Current transformers.
# Aluminium busbars of suitable capacity with incoming and
outgoing termination.
# Indicating lamps for "Load On" and "Set
Running".
# IP : 23 protection with insulation class H.
Others
# One dry and uncharged
battery with battery leads.
# Fuel Tank suitable for 8 hrs. of continuous running provided
with fuel level gauge, drain valve, air vent, inlet and outlet
connections.
Optionals
# Heavy duty air cleaner
# Microprocessor/ Relay based AMF control panel
# Weather and sound proof enclosure
# Trolley Mounted Mobile Sets
# Cold starting kit
# Electronic governor
# Heat Exchanger configuration
# Lub oil heater
# Belt failure safety
Click Here for Technical
Discription
|